Lenze 9400 Manual de usuario descargar pdf (Pagina 89)

Lenze · Servo-Inverter 9400 HighLine · Reference manual · DMS 10.0 EN · 11/2013 · TD05/06 89

4 Drive interface

4.2 Device commands

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

4.2.39 Save cam data

This function extension is available from software version V3.0!

The C00002

= "502: Save cam data" device command serves to save the cam data available in the

main memory of the controller with mains failure protection in the memory module.

[4-23] "Save cam data" function

• This function is executed in the background and is also possible when the controller is enabled

and the application is running.

• However, this function is only executed if valid cam data are available.

• The cam data can also be saved if previously no cam data have been available on the memory

module.

• While the function is executed, no online change and no change of the cam data via parameters

can be carried out.

For software versions lower than V4.0 the following applies:

• If the cam data are provided with an access protection, the user password has to be entered in

C02900

first.

The following applies from software version V4.0:

• For saving the cam data, you do not need to enter a possibly existing user password (C02900

).

 Tip!

Detailed information on the access protection can be found in the chapter "Basic drive

functions", subchapter "Cam data management

". ( 552)

9400

RAM Memory module MM

Cam dataCam data

Cam application

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 953 954

Comentarios a estos manuales

Sin comentarios