Lenze 9400 Manual de usuario descargar pdf (Pagina 601)

Lenze · Servo-Inverter 9400 HighLine · Reference manual · DMS 10.0 EN · 11/2013 · TD05/06 601

13 Diagnostics & fault analysis

13.3 Drive diagnostics via keypad/bus system

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

13.3 Drive diagnostics via keypad/bus system

Keypad display of the controller status

Display parameters

The parameters listed in the following tables serve to query current states and actual values of the

controller for diagnostic purposes, e.g. by using the keypad, a bus system or the »Engineer« (with an

online connection to the controller).

• These parameters are listed in the »Engineer« parameter list and the keypad in the Diagnostics

category.

• A detailed description of these parameters can be found in the chapter "Parameter reference

".

( 713)

• If the keypad on the front of the controller is connected to the

diagnostic interface X6, the status of the controller is shown

via different icons on the LCD display in the area .

Icon Meaning Note

 Controller is ready for operation.

 Controller is enabled.

 Application in the controller is stopped.

 Quick stop active

 Controller is inhibited. The power outputs are inhibited.

 Controller is ready to switch on.

 Speed controller 1 at the limit. The drive is torque-controlled.

 Set current limit has been exceeded in motor

or generator mode.

 Pulse inhibit active The power outputs are inhibited.

 System fault active

 Fault active

 Trouble active

 Quick stop by trouble active

 Warning active

Parameter Display

C00183 Device status

C00166 Error description

C00168 Error number

C00051 Actual speed [rpm]

C00052 Motor voltage

C00054 Motor current

1 2 ... 596 597 598 599 600 601 602 603 604 605 606 ... 953 954

Comentarios a estos manuales

Sin comentarios