Lenze E94AxHE Servo Drives 9400 HighLine (Firmware 01-37 Manual de usuario Pagina 645

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 679
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 644
L Firmware 1.37 - 09/2006 645
9400 HighLine | Parameter setting & configuration
Parameter reference
Parameter list | C02810
C02810
C02830
C02850
C02851
Parameter | Name:
C02810 | Delay time for TPx
Data type: UNSIGNED_32
Index: 21765
d
= 5505
h
The set delay time will be considered when the position is determined at the touch probe time and will be used to
compensate for dead times, if necessary.
Please observe the setting of the input filter for the digital inputs (C02830
).
Setting range
(min. value | unit | max. value)
0 us 7000
Subcodes Lenze setting Information
C02810/1 0 us Delay for touch probe 1 ... 8
C02810/...
C02810/10
; Read access ; Write access CINH PLC STOP No transfer COM MOT
Parameter | Name:
C02830 | DIx delay time
Data type: UNSIGNED_8
Index: 21745
d
= 54F1
h
Input filter for digital inputs
Can be used to filter "spikes" at the digital inputs, if necessary.
Each digital input is assigned to a subcode.
Since the filter is a "counting" filter, the indicated times are only approximate values.
Selection list Information
02 μs Filter time
14 μs
28 μs
3 16 μs
4 32 μs
5 64 μs
6 128 μs
7 256 μs
8 512 μs
9 1024 μs
10 2048 μs
11 4096 μs
12 8192 μs
13 16384 μs
14 32768 μs
Subcodes Lenze setting Information
C02830/1 0: 2 μs Setting of digital input 1 ... 8
C02830/...
C02830/8
; Read access ; Write access CINH PLC STOP No transfer COM MOT
Parameter | Name:
C02850 | Service code
Data type: UNSIGNED_32
Index: 21725
d
= 54DD
h
This code is used internally by the controller and must not be overwritten by the user!
Parameter | Name:
C02851 | Service code
Data type: UNSIGNED_32
Index: 21724
d
= 54DC
h
This code is used internally by the controller and must not be overwritten by the user!
Vista de pagina 644
1 2 ... 640 641 642 643 644 645 646 647 648 649 650 ... 678 679

Comentarios a estos manuales

Sin comentarios