Lenze E94AxHE Servo Drives 9400 HighLine (Firmware 01-37 Manual de usuario Pagina 208

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 679
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 207
9400 HighLine | Parameter setting & configuration
Basic drive functions
Limiter | Control word of the safety module
208 Firmware 1.37 - 09/2006 L
9.10.2 Control word of the safety module
To provide an easy connection of the safety module to the application the currently valid
safety requirement is transferred to the following interface using a bit-coded control word:
[9-7] Interface to connect the safety module to the basic function "Limiter"
r It is also possible to make several requirements at the same time via the control word,
e.g. manual jog with limited increment and limited speed 2.
r If no safety module is connected, the control word can be generated by means of a
converter module.
r The bit coding of the control word is described in the "safety engineering" chapter.
Control word of the safety module SM3xx
(C 137)
LS_InterfaceSafetyModule
SM_dwControl
LS_Limiter
LIM_dwControl
Vista de pagina 207
1 2 ... 203 204 205 206 207 208 209 210 211 212 213 ... 678 679

Comentarios a estos manuales

Sin comentarios