Lenze E94AxHE Servo Drives 9400 HighLine (Firmware 01-37 Manual de usuario Pagina 288

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 679
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 287
9400 HighLine | Parameter setting & configuration
TAs for interconnection via electrical shaft
Introduction
288 Firmware 1.37 - 09/2006 L
12.1 Introduction
The following subchapters provide information on the electrical shaft.
12.1.1 Synchronisation of the drives via a master angle
By coupling the drives via a master angle the positions are firmly allocated to each other
like a mechanical shaft.
r A drive with a virtual master or a real master (encoder) is able to create the master
angle and transmit this to the other drives which follow this master angle.
Advantages of this type of synchronisation
r The communication between the drives is very simple. A time-consuming evaluation of
the status signals of each drive and the control signals to be generated from it for each
single drive is not required.
r Due to the flexible electronics trimming functions can be carried out very easily. Thus,
motion sequences in machines can be easily synchronised and optimised.
r A variation of the master angle speed changes the number of cycles of the machine.
The drives keep the position allocation.
Vista de pagina 287
1 2 ... 283 284 285 286 287 288 289 290 291 292 293 ... 678 679

Comentarios a estos manuales

Sin comentarios