Lenze E94AxHE Servo Drives 9400 HighLine (Firmware 01-37 Manual de usuario Pagina 165

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 679
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 164
L Firmware 1.37 - 09/2006 165
9400 HighLine | Parameter setting & configuration
Basic drive functions
Homing | Parameter setting
9.5.1 Parameter setting
r Parameterisation dialog in the »Engineer«: Tab Application parameter dialog level
Overview All basic functions Homing
r Short overview of the parameters for homing:
9.5.1.1 Homing mode
The zero position, also called reference, can be defined by a reference search or reference
setting:
r In case of a reference search the drive travels according to a defined mode to detect the
reference independently.
r In case of reference setting the reference is manually set when the drive has stopped.
O Tip!
A reference search is mainly used for continuous systems or if the traversing range
or machine cycle of the drive cannot be displayed in the display space of the
encoder, e.g. when incremental encoders are used on a motor or single-turn
absolute value encoders or resolvers on geared motors.
Reference setting is usually executed only once during commissioning or in case of
service (e.g. when drive components are exchanged) and are normally used in
systems the machine cycle of which can be displayed in the display space of the
encoder, e.g. when multi-turn absolute value encoder or single-turn absolute value
encoders/resolvers are used in a machine cycle on one motor revolution.
Parameters Information
C02528
Traversing range
C02640
Ref. mode
C02642
HM position
C02643
HM target position
C02644
Ref. speed 1
C02645
Home acceleration 1
C02646
Ref. speed 2
C02647
Ref. acceleration 2
C02648
Home S-ramp time
C02649
HM torque limit
C02650
Homing inhibit time
C02651
HM touch probe configuration
C02652
Home position after mains switching
C02653
Max. rot. angle after mains sw.
C02656
Current position
Vista de pagina 164
1 2 ... 160 161 162 163 164 165 166 167 168 169 170 ... 678 679

Comentarios a estos manuales

Sin comentarios