Lenze ETC Motion Control Manual de usuario descargar pdf (Pagina 73)

100

101

Getting started

Testing CNC and PLC program

2.13

EDSTCXN EN 2.0

1. Start the ETC−MMI via <Start> W Programs W Lenze W ETC

In the ETC−MMI window, press <F11> (program).

The MMI window opens in the "Programming" operating mode. It shows

the text editor for the CNC program.

2. Press <F8> (Graphics) and afterwards <F7>(Graphics on/off).

The window is split. The text editor is displayed on the left, the display

field for the graph (graphic area) on the right.

3. Press <F2> (Open program).

4. Select the CNC program (e.g. test.din) and press <Enter>

5. Press <F7> (Program to NC).

6. Select the CNC program (e.g. test.din) and press <Enter>

The CNC program is transferred to the control system (¶ 49).

7. Press <S1> (Start).

The drives start and the profile of the rectangle are executed (¶ 49).

The drawn straight line from the zero point (0/0) to the starting point

(10/10) is now executed when the drive is also in the zero point.

Otherwise, the control system traverses the drives on a straight line from

the current point to the starting point.

8. Change the material speed to a small value (e.g. 1 %). For this purpose,

click <S7>(Override −).

When the PLC and CNC programs are loaded correctly, a marker follows

the circular profile. The output "Tool down" is set and reset according to

the called M−function.

ETCN035

9. To stop the drives, press <S2> (Stop).

Start CNC program

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 427 428

Comentarios a estos manuales

ama 11 Jan 2025 | 19:35:39

rasha

Lenze ETC Motion Control Manual de usuario Pagina 73

Comentarios a estos manuales

Relacionado con productos y manuales para Software Lenze ETC Motion Control