Lenze EVS9332xP Manual de usuario descargar pdf (Pagina 155)

100

101

Wiring of the standard device

Wiring of digital frequency input / digital frequency output

5.11



5.11−1

EDSVS9332P EN 5.0−07/2013

5.11 Wiring of digital frequency input / digital frequency output

Installation material required from the scope of supply:

Description Use Quantity

Protective cover Protection for unused Sub−D connections 4

Field Digital frequency output X10

Connection at drive controller Connector: Socket, 9−pole, Sub−D

Pin assignment Dependent on the selected basic configuration

Output frequency 0 ... 500 kHz

Signal Two−track with inverse 5 V signals (RS422) and zero track

Load capacity Max. 20 mA per channel

(up to 3 slave drives can be connected)

Special features The "Enable" output signal at X10/8 switches to LOW if the

drive controller is not ready for operation (e.g. disconnected

from mains). This can trip SD3 monitoring on the slave drive.

Internal voltage source

(X10/4, X10/5)

DC 5 V / max. 50 mA

Total current at X9/4, X9/5 and X10/4, X10/5: max. 200 mA

Field Digital frequency input X9

Connection at drive controller Connector: Pin, 9−pole, Sub−D

Input frequency 0 ... 500 kHz (TTL level)

Signal Two−track with inverse 5 V signals (RS422) and zero track

Signal evaluation Via code C0427

Current consumption Max. 5 mA

Special features With activated SD3 monitoring, TRIP or warning is tripped if

the "Lamp Control" input signal at X9/8 switches to LOW.

Due to this the drive controller can respond if the master drive

is not ready for operation.

Technical data

1 2 ... 150 151 152 153 154 155 156 157 158 159 160 ... 444 445

Comentarios a estos manuales

Sin comentarios

Lenze EVS9332xP Manual de usuario Pagina 155

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Lenze EVS9332xP