Lenze EVS9332xP Manual de usuario descargar pdf (Pagina 302)

Function library

Function blocks

3.5.65 Variable table − acceleration (VTACC)

3−274

EDSVS9332P−EXT DE 2.0

Function

A total of 34 table positions is available.

l Enter fixed values under C1303.

– 30 table positions (VTACC−No1 ... VTACC−No30) are available.

– Subcodes (C1303/1 ... C1303/30) define the table position number.

l Enter variable values in VTACC−INx.

– 4 table positions (VTACC−No31 ... VTACC−No34) are available.

– Signal input via function blocks.

– The values must be transmitted to the table positions before the corresponding program set

starts and accesses these values.

l C1384 indicates the values (in % of amax) on the table positions.

– Select table position (C1384/1 ... C1384/34) with subcode.

l C1385 displays the values (in inc) on the table positions.

– Select table position (C1385/1 ... C1385/34) with subcode.

l The conversion from a [units/s

] to a [inc] is performed according to the

formula:

a[inc] + a[unitsńs

] @

65536[incńr] @ gearnominator @ 16384

Feedconst.[unitsńr] @ geardenominator @ 1000000[1ńs

]

Tip!

Entries into the processing table are only required if FB inputs and outputs are used.

1 2 ... 297 298 299 300 301 302 303 304 305 306 307 ... 333 334

Sin comentarios

Lenze EVS9332xP Manual de usuario Pagina 302