Lenze EtherCAT Controller-based Automation Manual de usuario descargar pdf (Pagina 109)

Lenze · Controller-based Automation · EtherCAT® Communication Manual · DMS 6.4 EN · 04/2014 · TD17 109

8 Mixed operation - EtherCAT with other bus systems

8.3 EtherCAT and PROFINET

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

8.3 EtherCAT and PROFINET

[8-3] Example: Mixed operation of PROFINET with EtherCAT on the Lenze Controller 3221 C

 Note!

• In the Lenze automation system, no PROFINET master functionality is supported. In a

PROFINET network, a Lenze Controller can only be driven as I/O device (slave), e.g. by

a Siemens SIMATIC S7 PLC.

• In the Lenze automation system, Logic field devices can be exclusively operated via

PROFINET. Thus, as an I/O device, the Lenze Controller is a Logic field device.

• The Motion functionality is not supported when PROFINET is used. Always use

EtherCAT to connect inverters to be controlled via the central motion functionality.

 Communication manual Controller-based Automation PROFINET

Here you can find information on how to commission PROFINET components.

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 204 205

Sin comentarios

Lenze EtherCAT Controller-based Automation Manual de usuario Pagina 109