Lenze DSD Manual de usuario descargar pdf (Pagina 293)

100

101

Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23 293

10 Structure of the drive axis

10.3 Drive concept

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

10.3.3 Motor/gearbox: Direct mounting or standard mounting

Many Lenze gearboxes are provided for direct mounting. The first pinion of the gearbox is directly

mounted to the motor shaft. By this, coupling elements and possible torque limitations by clutches

are not required, and the drive is provided with a higher mechanical stiffness.

Standard mounting means coupling the motor shaft with the gearbox shaft via a clutch. The cou-

pling flanges of the motor and the gearbox are coupled via an adapter.

 Tip!

Standard mounting allows for a larger variety of motor-gearbox combinations. In addition,

the motor can be replaced more easily if necessary.

• Create an alternative DSD project and select standard mounting in the Drive concept

dimensioning step if you cannot find a suitable solution with the direct mounting se-

lection.

• Compare the differences, e.g. via the Project comparison.

[10-1] Lenze gearbox with standard mounting (left) and direct mounting (right)

1 2 ... 288 289 290 291 292 293 294 295 296 297 298 ... 495 496

Comentarios a estos manuales

Sin comentarios

Lenze DSD Manual de usuario Pagina 293

Comentarios a estos manuales

Relacionado con productos y manuales para Software Lenze DSD