Lenze PLC Designer ApplicationTemplate (PLC Designer R3- Manual de usuario descargar pdf (Pagina 94)

Architecture: The ApplicationTemplate in detail

Error handling

Lenze · ApplicationTemplate · 1.3 EN - 04/2013

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

2. Activation for one cycle: Via the baseChannelSetErrorQuit method, rising edge FALSE

ÊTRUE. The

method sets the xQuitErrors input to TRUE for one cycle.

If multiple errors occur, they cannot

be acknowledged individually. Further information:

L_EATP_ModuleErrorHandler

( 124)

9.9.4 Acknowledging errors: Response in the machine module

The xErrorQuitActive output on the L_EATP_ModuleErrorHandler block can be used within a module

application to acknowledge errors on an integrated function block.

Defining errors - standard procedure

ErrorHandler.xQuitErrors := TRUE; //error acknowledgement active as long as value =

TRUE

•The SetErrors method is to be

extended by one function block.

•The MAP_EmptyModul_App1 FB is

to be extended by the

corresponding declaration.

•The xSetError[1...4] inputs must be

connected to the module

application.

• Assign the corresponding

parameter to the respective error

input:

• Error number,

•Error text,

•Error priority,

• Acknowledgement response

•More information:

L_EATP_ErrorSet

( 119)

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 176 177

Sin comentarios

Lenze PLC Designer ApplicationTemplate (PLC Designer R3- Manual de usuario Pagina 94