Lenze PLC Designer ApplicationTemplate (PLC Designer R3- Manual de usuario descargar pdf (Pagina 51)

Lenze · ApplicationTemplate · 1.3 EN - 04/2013 51

Working with the ApplicationTemplate

Creating your own machine modules: Copy/insertMM_EmptyModule

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

8.2 Creating your own machine modules: Copy/insertMM_EmptyModule

 Tip!

If individual machine modules are created, the ApplicationTemplate automatically assigns

the corresponding machine module-internal names.

Creating machine modules: What has to be done?

 How to proceed:

1. Copy the MM_EmptyModule machine module:

•Right-click the A65 EmptyModule\MM_EmptyModule folder

Select Copy

Empty Module.

2. Insert the previously copied machine module (Empty Module) below the

A70_MachineModuleSources folder:

•Right-click the A70_MachineModuleSources

 Insert Empty Module

The EmptyModule machine module template...

• ...has to be copied in the A65 EmptyModule folder

using the Copy Empty Module command and

• ...then using the Insert Empty Module command to

insert it into the A70_MachineModuleSources

folder.

In most cases (due to the individual requirements), you have

to create the (MM_Machine) machine control module

yourself.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 176 177

Sin comentarios

Lenze PLC Designer ApplicationTemplate (PLC Designer R3- Manual de usuario Pagina 51