Lenze PLC Designer ApplicationTemplate (PLC Designer R3- Manual de usuario descargar pdf (Pagina 38)

Opening the ApplicationTemplate

Visualisation of the machine modules

Lenze · ApplicationTemplate · 1.3 EN - 04/2013

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

• Depending on the standard response,

triggering an error at L_EATP_ErrorSet

results in a state change in area

.

• Possible error responses are: Error,

SystemFault, Warning, Information.

• Default setting of the

ApplicationTemplate (can be deactivated,

if required):

When an error is triggered, the higher-level

machine module changes to the "Quick

stop" state.

• The machine module forwards the state

to the higher-level machine module.

• The machine module on the top level

sets all lower-level machine modules to

the "Quick stop" status.

•The Module List button calls the detailed

view for the machine modules.

• Click the desired machine module to show

the respective status and further details.

•The Error List button calls the global error

list which provides an overview of the

errors that have occurred.

• The cause of the fault activation must

be eliminated. Then the corresponding

error must be reset.

• To reset the error, the Error Quit button

is to be pressed.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 176 177

Sin comentarios

Lenze PLC Designer ApplicationTemplate (PLC Designer R3- Manual de usuario Pagina 38