Lenze PLC Designer ApplicationTemplate (PLC Designer R3- Manual de usuario descargar pdf (Pagina 157)

Lenze · ApplicationTemplate · 1.3 EN - 04/2013 157

Application example: Flying saw

Creating and integrating machine modules

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

13.3.2 Integrating machine modules in the machine structure tree

The machine modules previously created in the device tree must be integrated in the machine

structure tree (MMT) to make the individual subfunctions of the machine structure executable in

the ApplicationTemplate.

 How to proceed:

Integrating a machine module in the MMT

1. Double-click and open in the device tree: A10_MachineModuleTree

2. Double-click MMT (PRG).

3. In the Tools dialog window, click the Block button.

• Create the new FB via drag-and-drop.

• Double-click the area of the FB. Click the button.

Use the Input assistance from the Application element...

• ...to assign the MFB_Infeed FB:

Application\A70_MachineModuleSources\MM_B01_Infeed

• ...to assign the MM_Dcl.B01_Infeed instance:

Application\A55_VarLists\MM_Dcl

Note: Go to the Input assistant and select the ; Insert with namespace prefix when

assigning the instance name.

Addressing of the machine modules in the MMT

4. In the Tools dialog window, click the Input button.

• Add the new input at MM_Address.

• Assign the relative address (example: 1).

Steps 3 and 4 must be executed for all machine modules M 2...M 6. The modules must be

created according to the previously determined tree structure. The representation of the

MMT is rotated by 90 degrees to the left. Every module must be assigned the following

elements:

• The corresponding function block,

• The instance of the module,

• The relative address.

1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 176 177

Sin comentarios

Lenze PLC Designer ApplicationTemplate (PLC Designer R3- Manual de usuario Pagina 157