Lenze EVS9332xS Manual de usuario descargar pdf (Pagina 225)

Function library

Function blocks

3.2.62 Storage block (STORE)

3−173

EDSVS9332S−EXT EN 2.0

3.2.62.1 STORE1 control via TP input E5

The trigger signal STORE1−TP−INH indicates a triggering done via the TP input E5 with a HIGH signal

(LOW−HIGH edge at X5/E5). At the same time it is signalled with STORE1−TP−INH that the triggering

is deactivated and must be reset to the active state. This can be done via

l STORE1−RESET = HIGH

l STORE1−ENTP = LOW−HIGH edge

l STORE1−ENWIN = HIGH and the comparison of phase signals

Comparison of phase signals

A phase signal is created from the speed signal at STORE1−MASKI and is compared with the phase

signal at STORE1−MASKV.

If the condition | STORE1−MASKI | w STORE1−MASKV

is fulfilled,

l the TP input E5 is enabled for the next triggering with STORE1−ENWIN = HIGH,

l the integrator for the speed signal at STORE1−MASKI is reset.

1 2 ... 220 221 222 223 224 225 226 227 228 229 230 ... 263 264

Sin comentarios

Lenze EVS9332xS Manual de usuario Pagina 225