Lenze CANopen Controller-based Automation Manual de usuario descargar pdf (Pagina 40)

Lenze · Controller-based Automation · CANopen® Communication Manual · DMS 6.3 EN · 04/2014 · TD17 40

8 Commissioning of the CANopen Logic bus

8.5 Creating a PLC program with a target system (Logic)

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

8.5 Creating a PLC program with a target system (Logic)

The »PLC Designer« serves to model the network topology in the control configuration.

 Tip!

The »PLC Designer« can be used to configure CANopen nodes and nodes on other fieldbus

systems.

Mixed operation of CANopen and EtherCAT

( 92)

 How to create a PLC program in the »PLC Designer«:

1. Use the menu command File  New project to create a new »PLC Designer« project.

2. Select "Standard project" in the New Project dialog window.

A "Standard object" simplifies the structure of a project in the »PLC Designer«; for instance,

a device tree structure with a target system, PLC logic, etc. is provided.

• Go to the Name input field and enter a name for your »PLC Designer« project.

• Select the previously created project folder as storage location in the Location

selection field.

Create a project folder

( 38)

3. Confirm the entries by clicking OK.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 109 110

Sin comentarios

Lenze CANopen Controller-based Automation Manual de usuario Pagina 40