Lenze Cam Designer Professional getting started Manual de usuario descargar pdf (Pagina 65)

Cam Designer Professional

63Cam Designer Professional DE/EN 2.0

Connections

In Curve Mode, the individual sections of

the cam profile are automatically joined

(connected) to form a continuous curve. In

this tab, you can select the type of

connection.

• The default setting is Automatic .

Depending on the shape and the

boundary values of the profile section,

the program will automat ically select

connections with a minimum jolt to

protect the machine.

• Alternatively, you can select fif th degree

polynomials.

• If you select Reduced Overshoot,

polynomials can be optionally combined

with lines to reduce overshoot to a

minimum.

Machine

By default, the selection of graphical

objects and the r epresentation of speed and

acceleration r efers to geometrical units. In

this tab, you can enter machine data to

calculate the physical limit values of the

motion profile.

• You can choose between linear and

rotary axis and define the reference

speed of the master axis for the

selected axis.

• For r otary axes, the maximum speed is

selected in revolutions per minute

[r.p.m.], for linear axes, in units of

distance per second [1/s].

• If you uncheck Normalized V elocity and Acceleration in Chart, the velocity will be indicated in units of

distance per second [1/s] and the acceleration in units of distance per second

[1/s

• The slave is always considered to have a linear axis. The value range of t he s lave is therefore always

indicated in units of distance (e. g. mm). The velocity is indicated in units of distance/s (mm/s) and the

acceleration in units of distance/s

(mm/s

Show/Hide Bookmarks

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 82 83

Comentarios a estos manuales

Sin comentarios

Lenze Cam Designer Professional getting started Manual de usuario Pagina 65

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Lenze Cam Designer Professional getting started