Lenze E94AYCPM Manual de usuario descargar pdf (Pagina 106)

14 Parameter reference

14.3 Parameters of the communication module for slot MXI2

106

Lenze · E94AYCPM communication module (PROFIBUS®) · Communication Manual · DMS 12.0 EN · 11/2012 · TD17

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

C14867

C14868

C14880

Parameter | Name:

C14867 | Display: Most recent diagnostic data

Data type: OCTET_STRING

Index: 9708

= 25EC

Display of the last diagnostic data sent to the PROFIBUS master (ASCII string with 16 characters)

Advanced diagnostic message

( 85)

; Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT

Parameter | Name:

C14868 | Display: DP state

Data type: UNSIGNED_8

Index: 9707

= 25EB

Available from software version 01.21!

Display of the DP states (Decentralized Peripherals)

Short-time interruption of PROFIBUS communication

( 79), see fig. [11-1]

Selection list (read only)

0 Waiting for parameterisation

1 Waiting for configuration

2 Data exchange

3 n/a

; Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT

Parameter | Name:

C14880 | Reaction on communication fault

Data type: UNSIGNED_8

Index: 9695

= 25DF

Monitoring response to a communication fault on the PROFIBUS

A change in the monitoring response is effective immediately.

Permanent interruption of PROFIBUS communication

( 78)

Selection list

0 No response

1 Error

3 Quick stop by trouble

4 Warning locked

6 Information

Subcodes Lenze setting Info

C14880/1 0: No response The response set here for the "Watchdog/Data

Exchange" monitoring function is executed if the bus

station ...

• does not receive a message from the master within

the watchdog monitoring time (displayed in C14882/

1) if there is an active connection.

• detects that it is no longer in the "DATA_EXCHANGE"

status. Please see also the notes given under C14881

C14880/2 0: No response The response set here for the "DPV1 MSAC2" monitoring

is executed if the bus station does not receive a "DPV1

MSAC2" message from the master within the monitoring

time (displayed in C14882/2

) if there is an active

connection) and the MSAC2 connection is stopped by the

slave.

Note: We recommend only setting "information" as

response so that no drive-relevant response is executed.

; Read access ; Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 124 125

Comentarios a estos manuales

Sin comentarios

Lenze E94AYCPM Manual de usuario Pagina 106

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Lenze E94AYCPM