Lenze E84DGFCR Manual de usuario descargar pdf (Pagina 36)

Communication manual 8400 motec PROFINET

Commissioning

Establishing an online connection via PROFINET with the Lenze »Engineer«

36 L EDS84DMOTPNET EN 2.0 - 11/2011

In the »Engineer«, by means of the menu command Online  Set communication path and

go online, you can select the PROFINET communication path. The PROFINET nodes

configured previously are shown in the Communication path dialog window:

If the device access path is not configured correcty, here the IP address of the controller

selected in the display field can be entered manually.

Via Search/Enter you can establish a connection to devices which have not appeared

in the display field. Corresponding settings for this can be made in the dialog window Enter

IP address, which is shown:

Here you can enter an IP address manually or execute the following actions using the

buttons:

 Execute the console command Ping.

 Assign the IP address via the Configurator.

Settings via the PROFINET configurator of the »Engineer«

( 31)

 Select the device access path to the desired controller by clicking Find.

After having established the online connection, you can continue work with the

»Engineer« as usual.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 89 90

Sin comentarios

Lenze E84DGFCR Manual de usuario Pagina 36