Lenze c300 Manual de usuario descargar pdf (Pagina 33)

5 Commissioning the controller

5.4 Configuring the controller

Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

5.4 Configuring the controller

This chapter provides information on how to configure the Controller during initial commissioning.

The IP address setting is preserved after a restart of the system.

5.4.1 Establishing an automatic dial-up connection

Further information on how to establish an automatic dial-up connection, remote maintenance and

diagnostics options can be found under:

Remote maintenance and diagnostics

( 79)

In order to carry out a remote maintenance on the controller different mechanisms are provided:

Diagnostics via Telnet

( 82)

Data transfer via FTP ( 85)

Activate Windows® CE interface ( 92)

Diagnostics with the logbook ( 89)

5.4.2 Entering the IP address of the controller

The controller has the following network settings by default:

During initial commissioning of the Controller, the desired IP address has to be entered.

Optionally, the network settings can be selected via a file:

Specifying the IP address of the controller via file (optional)

( 36)

 Note!

Controller c300/p300:

• These devices come with a deactivated Telnet and FTP in the Lenze standard setting.

• The functions can be activated via the »WebConfig«. The activation of the functions

can influence the real-time behaviour.

• After a restart of the Controller, the functions are deactivated again.

Address Lenze setting

IP address 192.168.5.99

Subnetwork 255.255.255.0

Default gateway 192.168.5.1

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 194 195

Sin comentarios

Lenze c300 Manual de usuario Pagina 33