Lenze c300 Manual de usuario descargar pdf (Pagina 14)

Lenze · Controller | Parameter setting & programming · Reference Manual · DMS 1.5 EN · 04/2014 · TD17 14

2 Safety instructions

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

2 Safety instructions

Please observe the following safety instructions when you want to commission an automation

system or a plant using a controller.

 Read the documentation supplied with the corresponding field device thoroughly before

starting to commission the devices with the controller!

The device documentation contains safety instructions which must be observed!

 Danger!

According to today's scientific knowledge it is not possible to ensure absolute freedom

from defects of a software.

If necessary, systems with built-in inverters must be provided with additional

monitoring and protective equipment complying with the relevant safety regulations

(e.g. law on technical equipment, regulations for the prevention of accidents) in each

case, so that an impermissible operating status does not endanger persons or facilities.

During commissioning persons must keep a safe distance from the motor or the

machine parts driven by the motor. Otherwise there would be a risk of injury by the

moving machine parts.

 Stop!

If you change parameters in the engineering software while a device is connected online,

the changes will be directly accepted by the device.

A wrong parameter setting can cause unpredictable motor movements.

By an unintended direction of rotation, too high speed, or jerky operation, the driven

machine parts may be damaged.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 194 195

Sin comentarios

Lenze c300 Manual de usuario Pagina 14