Lenze E84DxxxxxxxxxR Manual de usuario descargar pdf (Pagina 79)

EDS84DPNET EN 4.0 - 11/2010 L 79

Communication manual 8400 protec PROFINET

Parameter reference

Table of attributes

13.2 Table of attributes

The table of attributes contains information which is required for communicating with the

controller via parameters.

How to read the table of attributes:

Column Meaning Entry

Code Parameter name Cxxxxx

Name Parameter short text (display text) Text

Index dec Index by which the parameter is addressed.

The subindex for array variables corresponds to the

Lenze subcode number.

24575 - Lenze code number Only required for access via bus

system.

hex 5FFF

h

- Lenze code number

Data DS Data structure E Single variable

(only one parameter element)

A Array variable

(several parameter elements)

DA Number of array elements (subcodes) Number

DT Data type BITFIELD_8 1 byte, bit-coded

BITFIELD_16 2 bytes, bit-coded

BITFIELD_32 4 bytes, bit-coded

INTEGER_8 1 byte with sign

INTEGER_16 2 bytes with sign

INTEGER_32 4 bytes with sign

UNSIGNED_8 1 byte without sign

UNSIGNED_16 2 bytes without sign

UNSIGNED_32 4 bytes without sign

VISIBLE_STRING ASCII string

OCTET_STRING

Factor Factor for data transmission via a bus system,

depending on the number of decimal positions

Factor 1 ≡ no decimal positions

10 ≡ 1 decimal position

100 ≡ 2 decimal positions

1000 ≡ 3 decimal positions

Access R Read access ; Reading permitted

W Write access ; Writing permitted

CINH Controller inhibit required ; Writing is only possible when the controller is inhibited

1 2 ... 74 75 76 77 78 79 80 81 82 83 84

Comentarios a estos manuales

Sin comentarios