Lenze E84DxxxxxxxxxR Manual de usuario descargar pdf (Pagina 76)

Communication manual 8400 protec PROFINET

Parameter reference

Parameters relevant for communication

76 L EDS84DPNET EN 4.0 - 11/2010

C13887

C13899

C13900

Parameter | Name:

C13887 | Suppress signalling diag. mess. upon

Data type: BITFIELD_8

Index: 10688

d

= 29C0

h

This code serves to inhibit the transmission of alarm messages to the IO controller. By this, errors of a specific type

can be systematically suppressed. All errors are entered in the logbook furthermore.

• A change will only become effective immediately if no error number with the error type selected here is pending

in C00165.

Value is bit-coded: Information

Bit 0 Error

Bit 1 Trouble

Bit 2 Quick stop by trouble

Bit 3 Warning locked

Bit 4 Warning

Bit 5 Reserved

Bit 6 Reserved

Bit 7 Reserved

; Read access ; Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT

Parameter | Name:

C13899 | Station name

Data type: VISIBLE_STRING

Index: 10676

d

= 29B4

h

The name with a max. length of 240 characters is distributed to the subindices. The name can be entered starting

with subindex 1. The following, unused subindices are not relevant.

• The station name must be assigned in accordance with the PROFINET specification. In the standard setting a

deleted name is displayed. The name is also deleted if the "Reset to factory defaults" command is executed by an

IO supervisor or an IO controller.

• A change of the station name will only become effective by switching the mains of the controller.

Setting the station name

( 25)

Subcodes Lenze setting Information

C13899/1 1st ... 30th character

C13899/2 31st ... 60th character

C13899/3 61st ... 90th character

C13899/4 91st ... 120th character

C13899/5 121st ... 150th character

C13899/6 151st ... 180th character

C13899/7 181st ... 210th character

C13899/8 211th ... 240th character

; Read access ; Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT

Parameter | Name:

C13900 | Firmware product type

Data type: VISIBLE_STRING

Index: 10675

d

= 29B3

h

The code contains a string with a length of 8 bytes. The identification code "E84DFYER" is displayed.

; Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 82 83 84

Comentarios a estos manuales

Sin comentarios