Lenze EVS9332xK Manual de usuario descargar pdf (Pagina 120)

Function library

Function blocks

3.2.24 Clutch (CLUTCH 3)

3−92

EDSVS9332K−EXT EN 4.0

Signal Source Note

Name Type DIS DIS format CFG List

CLUTCH3−OPEN−INSTANT d C1701/1 bin C1700/1 2 HIGH: Disengage immediately, reset fault messages

CLUTCH3−CLOSE d C1701/3 bin C1700/3 2 HIGH: Close clutch

LOW: Open clutch

CLUTCH3−TARGET−POS ph C1703/1 dec [inc] C1702/1 3 Specification of the target position

CLUTCH3−DIST ph C1703/2 dec [inc] C1702/2 3 Reserved

CLUTCH3−PHI−SET ph C1703/3 dec [inc] C1702/3 3 Setpoint position of the external master angle

CLUTCH3−PHI−ACT ph C1703/4 dec [inc] C1702/4 3 Actual position of the internal master angle

CLUTCH3−LEN ph C1703/5 dec [inc] C1702/5 3 Clock pulse length (X axis)

CLUTCH3−LOW−VEL phd C1705/1 dec [rpm] C1704/1 4 Specification of a minimum speed with which the

internal master angle is to rotate after disengaging

CLUTCH3−OPEN d 2 HIGH: Clutch disengaged

LOW: Clutch engaged

CLUTCH3−ACC/DEC d 2 HIGH: Signal at CLUTCH3−PHOUT and CLUTCH3−NSET

is accelerated

LOW: Signal at CLUTCH3−PHOUT and CLUTCH3−NSET

is decelerated

CLUTCH3−DIR−ERR d 2 HIGH: The input signals at CLUTCH3−PHI−SET and

CLUTCH3−PHI−ACT have an opposite direction of

rotation

CLUTCH3−INIT d 2 Reserved

CLUTCH3−ERR d 2 General error message from CLUTCH3

 HIGH: The process of engaging the clutch has been

started although the disengaging process had not

yet been completed.

 The value 0 is applied at CLUTCH3−LEN.

CLUTCH3−VEL−TO−LOW d 2 HIGH: The process of engaging the clutch cannot be

carried out, as the speed at CLUTCH3−PHI−SET is

< 4 min

−1

CLUTCH3−ACT−SET ph 3 Differential signal between CLUTCH3−ACT−SET and

CLUTCH3−PHI−SET if CLUTCH3−CLOSE is set = HIGH

 The differential signal corresponds to the distance

of the internal master angle still be compensated

until it runs synchronously with the external master

angle.

CLUTCH3−PHOUT ph 3 Output of the internal master angle position

 The signal refers to one machine clock pulse

(CLUTCH3−LEN)

 The signal can be linked to CDATA−XIN.

 If the clutch is engaged, the external and internal

master angles are running synchronously.

CLUTCH3−NSET phd 4 Speed setpoint

Function

l Important notes ( 3−93)

l Fault messages ( 3−93)

l Disengage immediately ( 3−93)

l Minimum speed after disengaging ( 3−94)

l Time−controlled engaging ( 3−95)

l Selection of the disengaging position ( 3−96)

l Selection of the target position in the disengaged state ( 3−97)

l Time−controlled disengaging in target position ( 3−97)

l Time−controlled disengaging at the disengaging position ( 3−99)

l Engaging the clutch at different positions of the external master angle ( 3−100)

l Time−controlled engaging ( 3−102)

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 385 386

Comentarios a estos manuales

Sin comentarios

Lenze EVS9332xK Manual de usuario Pagina 120

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Lenze EVS9332xK