Lenze PROFIBU PC-based Automation Manual de usuario Pagina 62

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 69
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 61
Control technology | PROFIBUS communication manual
Diagnostics
Diagnostics in the »PLC Designer«
62 L DMS 2.2 EN 07/2011 TD17
10 Diagnostics
PROFIBUS can be diagnosed in the »PLC Designer« by means of specific diagnostics
function blocks.
Moreover, the field devices, PROFIBUS communication modules, and the MC-PBM
communication card are provided with LED status displays for diagnostics.
10.1 Diagnostics in the »PLC Designer«
For the diagnostics of PROFIBUS in the »PLC Designer«, the BusDiag.lib function library
( 39) provides two function blocks:
DiagGetBusState function block
( 39):
Shows the current bus status.
DiagGetState function block
( 41)
If a station available on the bus reports an error, its specific diagnostics information
can be read.
10.2 Error messages if communication card MC-PBM is not available
If no communication card MC-PBM has been inserted into the industrial PC, error messages
occur during the download of the »PLC Designer« project.
Remedy: Insert the communication card MC-PBM into the industrial PC.
Vista de pagina 61
1 2 ... 57 58 59 60 61 62 63 64 65 66 67 68 69

Comentarios a estos manuales

Sin comentarios