Lenze Controller-based Automation Manual de usuario descargar pdf (Pagina 47)

Lenze · Controller-based Automation · System Manual · DMS 1.4 EN · 04/2014 · TD17 47

5 System architecture

5.1 Communication link between Engineering PC and field devices

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

5 System architecture

By means of the Engineering PC, you commission one or several Controllers.

For this purpose, install Engineering tools

( 15) required for commissioning, parameter setting,

configuration and diagnostics of the Lenze automation system on the Engineering PC.

[5-1] Example: Engineering PC with several 3200 C controllers, connected via integrated Ethernet switch

• The Controllers 3200 C/p500 are equipped with an integrated Ethernet switch, which enables a

line topology.

• Connection of the Engineering PC is only required for programming and commissioning.

Continuous operation of the control and visualisation system does not

require the Engineering

PC anymore afterwards.

• The Engineering PC is connected to the respective controller via the network interface and

communicates via Ethernet.

5.1 Communication link between Engineering PC and field devices

The Engineering PC is required to commission the controller and for the commissioning of the

inverters as well as of the other subordinate field devices.

In order to establish an online connection between the Engineering PC and a field device (e.g. i700

servo inverter), two communication links are possible:

Online connection via the gateway function of the controller via CAN/EtherCAT

( 48)

Direct connection ( 50)

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 67 68

Sin comentarios

Lenze Controller-based Automation Manual de usuario Pagina 47