Lenze Controller-based Automation Manual de usuario descargar pdf (Pagina 36)

4 System components

4.4 Runtime software of the Lenze Controllers

Lenze · Controller-based Automation · System Manual · DMS 1.4 EN · 04/2014 · TD17

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

4.4.3.2 Sample topology 2: Separate control and visualisation

[4-2] Sample topology: Controller 3200 C as gateway for the Visualisation Controller (IPC)

The Visualisation Controller (IPC) accesses the field devices via the Controller 3200 C as gateway.

In order to separate the control and visualisation, the integrated gateway function of the controller

can be used.

The use of this topology is advisable...

• to achieve a higher performance;

• for the use of different operating systems within one automation system.

Engineering tools required: »EASY Starter«, »Engineer«

Advantages

•No

impact on the real-time capability of the fieldbus by the visualisation.

• Several visualisations can access the controller.

• Most suitable for extensive visualisation processes.

 Note!

In case of Controller c300/p300, the gateway function is not supported (in preparation).

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 67 68

Sin comentarios

Lenze Controller-based Automation Manual de usuario Pagina 36