Lenze GSS Manual de usuario descargar pdf (Pagina 31)

Mechanical installation

Mounting

General information about the assembly of drive systems

BA 12.0023−EN 7.0

5.4.2 General information about the assembly of drive systems

( Stop!

The lubricant fill quantity of the gearboxes is matched to the mounting

position. The mounting position indicated on the nameplate must be observed

to avoid damage to the gearbox.

ƒ Take safety measures prior to any operation:

– Disconnect the machine from the mains, ensure standstill of the drive system and

avoid any machine movement.

– Check the proper state of the drive system. Never install and set up damaged drive

systems.

– Check the combination of drive function and machine functions. Check the

direction of rotation (see 5.3).

ƒ The mounting surfaces must be even, without torsion, and free from vibration.

ƒ Align the drive system on the mounting surfaces exactly with the machine shaft to

be driven.

– Ensure that the assembly is without torsion to avoid additional load.

– Compensate for minor misalignments by using suitable flexible couplings.

ƒ Support the reaction torque appropriately.

ƒ Fixings of accessories and attachments must be secured against loosening.

We recommend that screw connections are glued.

5.4.3 Assembly of transmission elements on solid shafts

ƒ Draw the transmission elements onto the output shaft only by using the centering

thread.

( Stop!

Shocks and blows to the shafts damage the roller bearings.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 79 80

Sin comentarios

Lenze GSS Manual de usuario Pagina 31