Lenze GSS Manual de usuario descargar pdf (Pagina 28)

Mechanical installation

Storage

BA 12.0023−EN 7.0

5.2 Storage

If you do not install the gearbox immediately, ensure appropriate conditions of storage.

ƒ Generally

– Store gearbox in dry, clean (dust−free) and sunlight−protected indoor rooms.

– The storage location must be free of vibration and shocks (V

eff

< 0.2 mm/s) to

avoid roller bearing downtime damage.

– Temperature changes with condensate formation must be avoided.

– Do not activate breather element to prevent air exchange with ambient air.

ƒ Up to one year:

– Store the gearbox with breather such that the breather screw is located at the top.

– Shafts and bright surfaces are delivered with protection against corrosion. Spots

with defective corrosion protection must be re−treated.

– On motors with condensation drain holes (option), the plug screw must be

removed (see chapter 5.4.1).

ƒ Over one year, up to two years:

– Before storage, shafts and bright surfaces must be provided with a long−term

anticorrosive agent (e.g. Anticorit BW 366 from the company Fuchs).

– Set up gearbox in mounting position A.

– Fill gearbox with oil grade filled in (see nameplate) up to the top breather / oil

bore. Then mount plug screw or breather element (do not activate) again.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 79 80

Sin comentarios

Lenze GSS Manual de usuario Pagina 28