Lenze EMB9352−C Manual de usuario descargar pdf (Pagina 94)

Mechanical installation

Mounting in cold−plate design

Mounting



EDBMB935X DE/EN/FR 13.0

6.4.4 Mounting

Before screwing the cooler and the cooling plate of the braking unit together,

apply the heat conducting paste supplied, in order to keep the heat transfer

resistance as low as possible.

ƒ Clean the contact surface using spirit.

ƒ Apply the heat conducting paste in a thin layer using a spattle or a paint

brush.

– The heat conducting paste in the accessory kit is sufficient to cover a

surface of approx. 1000 cm

ƒ Mount controller to the heatsink with 4 M5 fixing screws.

– Screw−tightening torque: 3.4 Nm (30 Ib−in).

9350br_004

Fig. 9 Dimensions

Type

a b b1 c d e g

[mm] [mm] [mm] [mm] [mm] [mm] [mm]

9351−V003

9352−V003

52 381 350 34 367 104 6.5

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 173 174

Sin comentarios

Lenze EMB9352−C Manual de usuario Pagina 94