Lenze E94P PositionServo with MVOB Manual de usuario descargar pdf (Pagina 72)

70 L S94H201E_13426446_EN

Operation

Physically connect the Drive to the PC:

To connect directly between a PC and a PositionServo drive it is recommended that a CAT 5e crossover

cable be connected between the P2 port on the PositionServo drive and the Ethernet port on the PC.

Ethernet Port

Drive

PC/Laptop

CAT 5e cable

To Connect from a PC to a PositionServo drive via an Ethernet switch or hub it is recommended that a CAT

5e straight through cable be connected from both the drive and PC directly to the Hub or switch.

PC/Laptop

PositionServo Drives

Switch 1

Non crossover cable

(PC to Switch)

(Drives to Switch)

PositionServo Drives

Switch 2

Non crossover cable

(Drives to Switch)

Non crossover or crossover cable depends on switch

(Switch to Switch)

6.2.4 Launching MotionView & Communicating to the PS Drive

Open your PC’s web browser.

Enter the drive’s default IP address [192.168.124.120] in the browser’s Address window.

The authentication screen may be displayed if the PC does not have Java RTE version 1.4 or higher. To

remedy this situation, download the latest Java RTE from http://www.java.com.

Java Authentication Java Splash Screen

When MotionView has ﬁnished installing, a Java icon entitled [MotionView OnBoard] will appear on your

desktop and the MVOB splash screen is displayed. Click [Run] to enter the MotionView program.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 101 102

Sin comentarios

Lenze E94P PositionServo with MVOB Manual de usuario Pagina 72