Lenze E94P PositionServo Modbus Manual de usuario descargar pdf (Pagina 8)

8P94MOD01C

Introduction

2.3 Ethernet Port

• Supported baudrates: 100Mbps and 10Mbps

• Supports two simultaneous Modbus TCP/IP connections on port 502

• Complies with IEEE 802.3

• Standard screened RJ45 connector with integrated status LEDs

• On open connections with no activity for more then 75 seconds, the PositionServo Drive sends a TCP keep-

alive message every 75 seconds to check the connection status.

NOTE:

The PositionServo does not support auto negotiation/cross over. Therefore, unless the connecting

device supports auto negotiation/cross over, a crossover cable will be required for one-to-one

connection.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 37 38

Sin comentarios

Lenze E94P PositionServo Modbus Manual de usuario Pagina 8