Lenze MC3000 Series Manual de usuario Pagina 62
- Pagina / 84
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
58 13435743_EDBM301_v14.0
45 @ TB10B (TERMINAL TB-10B SCALING)
This parameter scales the analog output signal at TB-10B. This setting is the load (in %)
that is indicated when the TB-10B output measures 10 VDC.
Example: The drive is part of a control system that requires a 0-10 VDC signal to
indicate 0-150% drive load. If this parameter is set to 150%, the drive will
output 10 VDC at 150% load (and about 6.7 VDC at 100% load).
NOTE: The output signal at TB-10B is aected by the setting of Parameter 34 - LOAD
MLT.
47 TB13A (TB-13A INPUT FUNCTION)
This parameter is used to select the function of terminal TB-13A. Closing TB-13A to TB-2
activates the TB - 13A input function. The following functions can be selected:
NONE Disables the TB-13A function.
0-10VDC Selects 0-10 VDC as the AUTO speed reference input (or setpoint
source in PID mode). The 0-10 VDC signal is wired to TB-5A
and TB-2.
4-20 MA Selects 4-20 mA as the AUTO speed reference input (or setpoint
source in PID mode). The 4-20 mA signal is wired to TB-5B and
TB-2.
SPEED#1 Selects PRESET SPEED #1 as the AUTO speed reference.
LOC SEL Selects LOCAL mode when Parameter 30 - CONTROL is set to
TB STRIP. Drive is in REMOTE mode if contact closure is not
made.
DEC FREQ Decrease frequency setpoint. Used with the MOP (motor operated
pot) function. Refer to Section 14.2.6 - SPEED REFERENCE
SELECTION.
48 TB13B (TB-13B INPUT FUNCTION)
This parameter is used to select the function of terminal TB-13B. Closing TB-13B to TB-2
activates the TB - 13B function. The following functions can be selected:
NONE Disables the TB-13B function.
0-10VDC Selects 0-10 VDC as the AUTO speed reference input (or setpoint
source in PID mode). The 0-10 VDC signal is wired to TB-5A
and TB-2.
4-20 MA Selects 4-20 mA as the AUTO speed reference input (or setpoint
source in PID mode). The 4-20 mA signal is wired to TB-5B and
TB-2.
SPEED#2 Selects PRESET SPEED #2 as the AUTO speed reference.
INC FREQ Increase frequency setpoint. Used with MOP (motor operated
pot) function. Refer to Section 14.2.6 - SPEED REFERENCE
SELECTION.
- MC3000 Series 1
- CONTENTS 3
- 1 GENERAL 5
- 2 MC3000 SPECIFICATIONS 7
- 4 13435743_EDBM301_v14.0 8
- EXAMPLE: M3450BP 8
- 4 MC3000 DIMENSIONS 9
- 5 MC3000 RATINGS 13
- M3100 SERIES RATINGS 13
- M3200 SERIES RATINGS 13
- M3400 SERIES RATINGS 14
- M3500 SERIES RATINGS 15
- 6 THEORY 16
- % TORQUE 17
- % HORSEPOWER 17
- 6.2.1 DRIVE OPERATION 18
- 6.2.2 CIRCUIT DESCRIPTION 19
- 7 INSTALLATION 20
- SPACING REQUIREMENTS 20
- 8 INPUT AC REQUIREMENTS 22
- 9 VOLTAGE SELECTION 23
- 10 POWER WIRING 24
- 12 INITIAL POWER UP 26
- STOP > 20.00 HZ 26
- 13 KEYPAD CONTROL 28
- STOP > 60.00 HZ 29
- STOP > 0% LOAD 29
- STOP > 0 VAC 29
- RUN > 60.00 HZ 30
- RUN > 85% LOAD 30
- RUN > 460 VAC 31
- FAULT: OVERLOAD 31
- FAULT > 60.00 HZ 31
- LOCAL -- AUTO -- IDC 32
- TIME: 487.2 HRS 32
- 14 CONTROL WIRING 33
- 14.2.1 REMOTE MODE SELECTION 34
- 14.2.6 ANALOG OUTPUT SIGNALS 36
- 14.2.7 DRIVE STATUS OUTPUTS 36
- 15.1 MC3000 TERMINAL STRIP 37
- STOP > 20.00 HZ 41
- PASSWORD 0000 41
- LINE VOLTS AUTO 42
- - SPEED DIAL 43
- #11 SPEED DIAL 43
- #11 MAX FRQ 43
- 17 PARAMETER MENU 44
- PARAMETER MENU 44
- 18 DESCRIPTION OF PARAMETERS 48
- INPUT LINE VOLTAGE SELECTION 48
- PRESET ACTIVATION 49
- ACCELERATION LIMITS 49
- DECELERATION LIMITS 50
- MAXIMUM DC BRAKE VOLTAGE 52
- FREQUENCY (Hz) 53
- MAXIMUM CONTINUOUS 53
- OUTPUT CURRENT (%) 53
- OUTPUT FREQUENCY (Hz) 55
- OUTPUT VOLTAGE (%) 55
- 3 OVERLOAD RUN 70
- 19.1 FEEDBACK DEVICES 71
- 19.5 TUNING THE PID CONTROL 73
- 42.53 HZ 35.0 PSI 74
- 42.53 HZ 57% LOAD 74
- 42.53 HZ 33.7 PSI 74
- 20 TROUBLESHOOTING 75
- FAULT MESSAGES 75
- 21 USER SETTING RECORD 77
- 76 13435743_EDBM301_v14.0 80
- 13435743_EDBM301_v14.0 77 81
- 78 13435743_EDBM301_v14.0 82
- (13435743) 84
Relacionado con productos y manuales para Hardware Lenze MC3000 Series
Hardware Lenze 931ExK10 Manual de usuario
(60 paginas)
(60 paginas)
Hardware Lenze MCH Series Drives Manual de usuario
(17 paginas)
(17 paginas)
Hardware Lenze EVS9332xP Manual de usuario
(334 paginas)
(334 paginas)
Hardware Lenze ECSDExxx Manual de usuario
(170 paginas)
(170 paginas)
Hardware Lenze EVF9338 Manual de usuario
(158 paginas)
(158 paginas)
Hardware Lenze E931Ex Manual de usuario
(47 paginas)
(47 paginas)
Hardware Lenze EPM−H315 Manual de usuario
(108 paginas)
(108 paginas)
Hardware Lenze EVS9332xP Manual de usuario
(445 paginas)
(445 paginas)
Hardware Lenze MCH Series Drives Manual de usuario
(27 paginas)
(27 paginas)
Hardware Lenze E84DxxxxxxxxxR Manual de usuario
(84 paginas)
(84 paginas)
Hardware Lenze ECSDKxxx Manual de usuario
(94 paginas)
(94 paginas)
Hardware Lenze EZN3A0022H150N002 Manual de usuario
(64 paginas)
(64 paginas)
Hardware Lenze EMB934x Manual de usuario
(206 paginas)
(206 paginas)
Hardware Lenze EVS9332xS Manual de usuario
(264 paginas)
(264 paginas)
Hardware Lenze Range 7800 Manual de usuario
(33 paginas)
(33 paginas)
Hardware Lenze EVF9383 Manual de usuario
(166 paginas)
(166 paginas)
Hardware Lenze SO30 8400 protec Manual de usuario
(66 paginas)
(66 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.110 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales