Lenze DISCO−Variable speed drive Manual de usuario descargar pdf (Pagina 22)

Electrical installation

Electrical adjusting device

Operational check

BA 11.5032−EN 3.0

4. The adjustment motor and actuator must stop.

5. If the actuator and adjustment motor do not stop, reverse the polarity of the

adjustment motor.

Adjustment motor in position 3 / limit−switch box in position 5

1. Switch on the DISCO.

2. Increase the speed: clockwise rotation of the actuator in the limit−switch housing.

3. While the speed is increased, activate the limit−switch S3 with an insulated

screwdriver.

4. The adjustment motor and actuator must stop.

5. If the actuator and adjustment motor do not stop, reverse the polarity of the

adjustment motor.

Adjustment motor in position 5 / limit−switch in position 3 Adjustment motor in position 3 / limit−switch in position 5

GT−DISCO−003.iso GT−DISCO−004.iso

Fig. 2 Circuit plan of the servo adjustment mechanism with potentiometer indicator

0 Driving motor 3 Actuator (the long lever activates S3)

1 Adjustable 4 Long lever

2 Auxiliary supply L1, N=230 V~ 5 Short lever

A1 Indicator 0...100V =/ 1000 W/V

(option)

Q1 Main switch*

F1, F2, F3 Fuses* Q2 Motor protection switch*

K1, K2 Reversing contactors* S1, S2 Pushbutton switches*

M1 Adjustment motor S3, S4 Limit switches

* not included in the scope of supply

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 43 44

Sin comentarios

Lenze DISCO−Variable speed drive Manual de usuario Pagina 22