Lenze SL Manual de usuario descargar pdf (Pagina 27)

Lenze 13466147 EDBSM01 v19 EN 27

Commissioning 4

Use the p and q buttons to scroll to the password value (the factory default password is “225”) and

press the Mode button. Once the correct password value is entered, the display will read "P01", which

indicates that the PROGRAM mode has been accessed at the beginning of the parameter menu (P01

is the ﬁrst parameter). This is shown below:

Press Mode to enter password

Use p and q to scroll to the

password value

Parameter menu is accessed

at the ﬁrst parameter

NOTE

If the display ﬂashes “Er”, the password was incorrect, and the process to enter the

password must be repeated.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 51 52

Sin comentarios

Lenze SL Manual de usuario Pagina 27