Lenze E84DGFCG Manual de usuario descargar pdf (Pagina 72)

Lenze · Decentralised frequency inverter 8400 motec (EtherNet/IP™ option) · EDS84DMOTEIP EN 2.0 - 10/2013 72

I/O data transfer (implicit messages)

Saving the I/O configuration in »RSLogix 5000«

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

8.8 Saving the I/O configuration in »RSLogix 5000«

After adding the scanner and the adapter to the I/O configuration, the configuration must be

downloaded to the controller. The configuration file should also be saved on your computer.

 How to save the I/O configuration:

1. Select the menu command Communications  Download.

• The "Download" dialog box will open.

• If a message box reports that »RSLogix 5000« is unable to go online, select the menu

command Communications Communications Who Active and try to find your

controller in the "Who Active" dialog box. If the controller is not shown there, the

EtherNet/IP driver needs to be added to »RSLinx« or configured in »RSLinx«. For more

information, please refer to the »RSLinx« online help.

2. Click the Download button.

• The I/O configuration is downloaded to the controller.

• When the download has been successfully completed, »RSLogix 5000« changes to online

mode and the I/O OK box in the upper left of the screen is green.

3. Select the menu command File  Save.

• If this is the first time the I/O configuration is saved, the "Save As" dialog box will open.

• Select a folder and enter a file name to save the configuration to a file on your computer.

• Finally, click the Save button.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 148 149

Sin comentarios

Lenze E84DGFCG Manual de usuario Pagina 72