Lenze PROFIBUS Controller-based Automation Manual de usuario descargar pdf (Pagina 25)

Lenze · Controller-based Automation · PROFIBUS® Communication Manual · DMS 4.3 EN · 04/2014 · TD17 25

6 Commissioning of PROFIBUS

6.1 Overview of the commissioning steps

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

6 Commissioning of PROFIBUS

This chapter provides information on how to commission the Lenze automation system with

PROFIBUS.

Depending on the field devices used, the following Lenze Engineering tools

( 21) are required:

• »EASY Starter«

• »Engineer«

•»PLC Designer«

6.1 Overview of the commissioning steps

The main commissioning steps are listed in the following table:

 Note!

Via PROFIBUS only Logic Field devices ( 19) can be operated in the Lenze automation

system.

Inverters which are to be controlled via the central Motion functionality must always be

connected via EtherCAT.

Mixed operation PROFIBUS with EtherCAT

( 42)

Step Activity Software to be used

1. Planning the bus topology

( 26)

2. Installing field devices

( 26)

3. Create a project folder

( 27)

4. Commissioning the field devices

( 27) »Engineer« / »EASY Starter«

5. Creating a PLC program with a target system (Logic/Motion)

( 28) »PLC Designer«

6. Configuring the communication parameters ( 30)

7. Importing missing devices / device description files

( 32)

8. Creating a control configuration (adding field devices)

( 33)

9. Configuration of the PROFIBUS master ( 37)

10. Configuring the PROFIBUS slave

( 40)

11. Compiling the PLC program code

( 41)

12. Logging in on the controller with the »PLC Designer«

( 41)

With the log-in, the fieldbus configuration and the PLC program are

loaded into the Controller.

13. Starting the PLC program

( 41)

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 54 55

Comentarios a estos manuales

Sin comentarios

Lenze PROFIBUS Controller-based Automation Manual de usuario Pagina 25

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Lenze PROFIBUS Controller-based Automation