Lenze PCMatic Operating system Windows CE4-2 Manual de usuario descargar pdf (Pagina 93)





7.2 Dial-up networking

In contrast with the establishment of a connection to the RAS server on the CE device, it is of

course also possible, to dial up in the opposite direction via a modem with the CE device on a

remote computer. This can be done by means of a dial-up connection.

7.2.1 Establishing a connection from a CE device to an RAS server

In order to set up a connection to a remote

computer via a modem, it is necessary for a new

dial-up connection to be established. Firstly, call

up the configuration page for network settings

on the CE device via Start→Settings. Then start

the connections assistant by means of a double

click on “Make New Connection”.

In the connection assistant, select “Dial-Up

Connection” and allocate a name for the

connection.

On the next page, select a Hayes-compatible

modem on COM1 or COM2.

It is possible to adjust “TCP/IP Settings…” and

“Security Settings”, depending upon the

configuration of the remote RAS server. In

general, however, it is possible to work with the

standard setting.

It is necessary to make the important

adjustments for the modem and the telephone

network by means of “Configure”.

This applies, for example, to the

modem’s baud rate....

...or to the “Wait for dial tone” setting.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 107 108

Sin comentarios

Lenze PCMatic Operating system Windows CE4-2 Manual de usuario Pagina 93