Lenze I/O system 1000 Manual de usuario descargar pdf (Pagina 33)

Lenze · I/O system 1000 · commissioning guidelines for the PLC Designer · DMS 1.2 EN · 11/2012 · TD05 33

4 Mapping the real station structure in the »PLC Designer«

4.4 Configuring I/O modules on the CANopen bus coupler module

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Configuring counter 0

17. Double-click the "EPM_S601_Counter_2xDC24V" device in the device view to open its

settings.

18. Select the "Direction (pulse on A and direction on B") entry for the counter 0 on the Modules

tab in the "Signal evaluation" table line:

Commissioning termination

19. Establish a connection to the control.

20. Load and start application.

21. Enter "4" as the new value in "Counter Control Word" and transmit it via the key

combination <Ctrl>+<F7> to start the counting process.

• As soon as the value has been transmitted and a countable signal is applied to the

respective input, the counter starts counting upwards.

• The value is transmitted cyclically to the control via the CAN bus.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 43 44

Sin comentarios

Lenze I/O system 1000 Manual de usuario Pagina 33