Lenze smd Series Drives Manual de usuario descargar pdf (Pagina 31)

27 RG-SDMOD

Drive Control & Communication

7.4 Basic Drive Status

AC Tech register 24 is a 6 word entity containing the drive’s status information. To read the entire status

block use Modbus function code 3 with a length of 6 to read starting at Modbus register number 40025.

The low byte of the third word in this block of data contains the operational status. If this is the only data

you want you can use Modbus function code 3 with a length of 1 to read register 40027.

The value of that low byte of data corresponds to the following operational states:

Table 20: Operational Status

Bit Parameter

0 FAULT LOCKOUT

1 FAULT

2 START PENDING

3 STOP

4 DC BRAKE

5 RUN AT 0Hz

6 RUN

7 ACCEL

8 DECEL

9 CURRENT LIMIT

10 DECEL OVERRIDE

11 LOWER TRANSISTORS SWITCHING ON

12 OFF

13 INHIBIT

1 2 ... 26 27 28 29 30 31 32

En español 27 Apr 2025 | 05:18:55

Variador

Lenze smd Series Drives Manual de usuario Pagina 31