Lenze SIMPLABELT Compact Units Manual de usuario descargar pdf (Pagina 15)

Installation

L BA S’belt KE EN 1.0

4 Installation

Caution!

Transport the drive only with transport equipment or hoists which are suitable for this load. Ensure

asafefixing.Avoidshocks!

The units in Z-design are not stable! Ensure proper support!

4.1 Storage

If you do not install the gearbox immediately, ensure the appropriate storage conditions.

l Up to one year:

Without special measures in dry, dust-free rooms which are protected against sunlight.

– Store gearbox with ventilation so that the breather screw is located at the top.

– Shafts and bright surfaces are delivered with protection against corrosion.

l Remove V-belts when storing the units for more than three months.

l More than a year:

Please contact the factory.

4.2 Installation

4.2.1 Preparation after long storage

Carefully remove the anti-corrosion agents from output shafts and flange surfaces.

4.2.2 General information on the assembly of drive systems

l Take the necessary safety measures prior to any operations:

– Disconnect the machine from the mains, ensure standstill of the machine and avoid any

machine movement.

– Check the proper state of the drive system. Never install and set-up damaged drive

systems.

– Check the combination of drive function and machine function. Check the direction of

rotation.

l The mounting surfaces must be even, without torsion, and free of vibrations.

l Align the drive system on the mounting surfaces exactly with the machine shaft to be driven.

l Ensure that the assembly is without torsion, to avoid additional load.

l Compensate minor misalignment by using suitable flexible couplings.

l Upport the reaction torque appropriately.

l Fixings of accessories and attachments must be secured against loosening.

l We recommend bonding screw connections.

Show/Hide Bookmarks

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 29 30

Sin comentarios

Lenze SIMPLABELT Compact Units Manual de usuario Pagina 15