Lenze DDS v2.1 Manual de usuario descargar pdf (Pagina 36)

Drive PLC Developer Studio

34 DDS DE/EN 2.1

Channel creation with default parameters:

• Select Communication parameter from the dialog box. Then click the entry

local h os t

➞

➞➞

➞Lenze standard and confirm the entry with OK.

Configuration “Lenze standard” (cannot be changed):

Settings: standard:

Communciation driver: CAN 8220 Lenze system bus dongle driver

Parameter: Possible settings

Parameter channel: 1, 2, configurator configurator

CAN bus node address: 1..63

CAN bus baud rate: 5, 10, 20, 50, 100, 125, 250, 500, 1000, configurator configurator

Configuration “Lenze OPC” (cannot be changed):

Settings: standard:

Communciation driver: System bus server driver

Parameter: Possible settings

CAN bus node address: 1..63

Channel creation with detected/desired parameters:

1. Click New, to open the dialog box Communication parameter: New channel and to configure a

new channel.

2. The input field Name already shows a name for the new channel. It is however possible to

change the name.

3. Select one entry e. g. CAN 8220.

4. Confirm t he selection with OK.

5. Select the new channel and enter the corresponding communication parameters by using the

arrow keys.

6. Accept the settings with OK.

Note!

If the establishment of a connection to a target system is faulty, please start the system bus

configuration tool.

Start

➞

➞➞

➞Program➞

➞➞

➞Lenze➞

➞➞

➞Communication➞

➞➞

➞Systembus configuration tool

Select an adapter (e.g. 2173) and click Dian ostics in t he register General.

Tip!

Confirm the function key <F1> in the dialog box Communication parameter, to call the online help and

further information on the setting of communication parameters.

Show/Hide Bookmarks

1 2 ... 31 32 33 34 35 36 37 38 39 40 41

Comentarios a estos manuales

Sin comentarios

Lenze DDS v2.1 Manual de usuario Pagina 36

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Lenze DDS v2.1