Lenze E84AYCPM Manual de usuario descargar pdf (Pagina 32)

Lenze · E84AYCPM communication module (PROFIBUS®) · Communication Manual · DMS 5.0 EN · 11/2012 · TD17 32

6 Commissioning

6.3 Setting the station address

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

6.3 Setting the station address

[6-1] DIP switch

The station addresses must differ from each other if several networked PROFIBUS stations are used.

The station address can be set via DIP switches 1 ... 64 or via the »Engineer« (code C13899

The housing labelling indicates the valencies of the individual DIP switches for setting the station

address.

• Valid address range: 1 … 126 (max. 126 slave stations)

• C13920

: Display of the current address setting of the switches

• C13864

: Display of the station address active on the PROFIBUS

E84YCPM001G

The station address can be set via DIP switches 1 ... 64 or via the

»Engineer« (code C13899

The unlabelled DIP switch (topmost position) does not have any

function.

Lenze setting: all switches in OFF position

Setting the station address via ...

DIP switch C13899

Condition At least one switch 1…64=ON •Switches 1...64=OFF

• All switches 1...64=ON

(invalid value "127")

DIP switch 64 32 16 8 4 2 1

Switch position OFF OFF ON OFF ON ON ON

Value 00

16 0 4 2 1

Station address = sum of the valencies = 16 + 4 + 2 + 1 = 23

DIP switch positions for setting the station address ( 107)

 Note!

Switch off the voltage supply of the communication module and then on again in order

to activate changed settings.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 114 115

Sin comentarios

Lenze E84AYCPM Manual de usuario Pagina 32