Lenze CS 9000 DVI Operating Instructions Manual de usuario descargar pdf (Pagina 38)

Electrical installation

Connecting the supply and peripheral devices

DVI interface



BA_CS9000DVI EN 4.0

6.3.4 DVI interface

 Note!

Only use the DVI cable from the scope of supply or one of the DVI cables

specified in the following table, featuring a maximum length of 2 m.

Otherwise a faultless signal transmission is not guaranteed.

Greater distances can be covered with the following Lenze accessories:

2 ... 5 m: "DVI/USB" cable set

5 ... 35 m: DVI/USB extender V4

Description Connection type Cable type

DVI interface DVI−D socket

DVI−D single link (18+1)

DVI−D double link (24+1)

IPC001

6.3.5 USB interface

Description Connection type Cable type

USB 2.0 host connection

Max. load: 5 V/500 mA

USB−A socket USB cable with USB−A plug

IPC001

Description Connection type Cable type

USB

USB device connection USB−B socket USB cable with USB−B plug

DVI/USB−010

6.3.6 USB interface on the front face (option)

Description Connection type Cable type

USB 2.0 host connection with

IP 65 cover

Max. load: 5 V/500 mA

USB−A socket USB cable with USB−A plug

EL100−013

 Note!

If you use USB interfaces routed to the outside, the data integrity cannot be

guaranteed. On the "PC based Automation" DVD you’ll find the "FM Tool"

software which can be used to deactivate the front USB interface if it is not

needed.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 52 53

Sin comentarios

Lenze CS 9000 DVI Operating Instructions Manual de usuario Pagina 38