Lenze CS 9000 DVI Operating Instructions Manual de usuario descargar pdf (Pagina 32)

Mechanical installation

Changing the labelling of the operator console



BA_CS9000DVI EN 4.0

5.3 Changing the labelling of the operator console

The control/display elements on the control desk are factory−labelled according to your

specifications. If you require a different labelling, create a new labelling strip according to

the following outline.

28.8 x15.5

16.4

6 x 40(=240)

315

1-2 x 45°

18.5

S1 S2 S3 S4 S5 S6 S7

CSB−004

Fig. 5−1 Labelling strip sizes

 Maximum labelling field sizes

All dimensions in millimetres.

 Tip!

We recommend glossy paper of 135g/m

The insertion of the strip can be simplified if the insertion−side corners are

provided with a chamfer (see illustration).

The labelling strip can be accessed from the back of the operator panel (inside) when the

housing is open.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 52 53

Sin comentarios

Lenze CS 9000 DVI Operating Instructions Manual de usuario Pagina 32