Lenze EPM Programmer EEPM1RA Manual de usuario descargar pdf (Pagina 8)

ENGLISH

Commissioning

3 Commissioning

3.1 Battery Operation

The EPM programmer is immediately ready for operation. It is delivered with 4 batteries

(1.5 V mono-cells).

3.2 Changing Batteries

For battery operation you need four mono-cell (D size) with 1.5V each. In order to access the battery compartment, you

must open the housing of the EPM programmer.

epm007

Open the battery compartment of the EPM programmer

1. Remove the 5 screws on the bottom of the EPM programmer

2. Remove the EPM Programmer base plate carefully.

epm004

Insert the batteries into the battery compartment

1. Insert the batteries into the battery compartment as shown in ﬁgure above.

- Pay attention to the correct polarity of the batteries!

2. Replace the base plate carefully and secure the housing with the 5 screws.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 113 114

Sin comentarios

Lenze EPM Programmer EEPM1RA Manual de usuario Pagina 8