Lenze Drive Server Bus server S7 getting started Manual de usuario descargar pdf (Pagina 26)

Busserv er S7

87Busserver S7 DE/EN 1.0

5.3.2 STEP7 example programs

The following example programs are part of the bus ser ver S7 delivery package. They o nly differ in their

hardware configuration:

File name Hardware configuration

Ldsexmpl.arj/zip PLC S7-400 with CPU412-2DP

Ldsexmp2.arj/zip PLC S7-300 with CPU312-2DP and CP342-5

When the ”DriveServer with bus server S7” software is installed, the example programs are saved by

default in the directory:

C:\Programs\Lenze\DriveServer\S7

Tip!

If you want to use one of the example programs, adapt the hardware configuration to your system

environment.

Detailed i nformation on the creation of a STEP7 program can be found in chapter 5.6.

(^ 91)

Integration of an example program in the STEP7 environment:

1. Select File

WRetrieve in the S7 manager.

2. Select the corresponding file (Ldsexmpl.arj/.zip and / or Ldsexmp2.arj/.zip)inthe

sub-directory \S7 of the DriveServer installation.

3. Select the target directory.

(Normally, the sub-directory “\s7proj” of the STEP7 installation.)

Tip!

After retreiving the example project, you will be asked if the project is to be opened. If you answer this

question with no, the proje ct might not be added to the project list and must be opened later using the

Scan command.

5.3.3 Device description files for the Lenze drives

When the ”DriveServer with bus server S7” software is installed, the device description files of the

Lenze drives for PROFIBUS are saved by default in the directory:

C:\Programs\Lenze\DriveServer\GSD

Copy these data into the sub-directory ”\s7data\GSD” of the STEP7 installation.

Tip!

The latest versions of the GSD files are available on our Internet homepage: http://www.Lenze.de

under Service

WDownloadsWPROFIBUS.

Show/Hide Bookmarks

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 62 63

Sin comentarios

Lenze Drive Server Bus server S7 getting started Manual de usuario Pagina 26